NSHTöu | Rubber Sheathed Cable for Reeling Purposes Crane Cable
Item descriptions
| Application: | It is to be used in dry and humid locations as well as in the open-air for frequent reeling processes and when the cable is exposed to heavy tensile and torsion load as well as to forced bending as in the case of cable carriages, line chains, drums or other mechanical equipment. Travel speed up to 120 m/min. |
| Construction: | 1.....fine-stranded tinned copper 2.....core insulation of rubber compound (EPR) 3.....inner sheath of rubber ( 5GM2) with open plaiting out of plastic threads to protect the cable from torsion 4.....outer sheath of polychloroprene (5GM2), black, oil resistant and flame retardant |
| Standards: | DIN VDE 0250-814 DIN EN 60228 class 5 (construction) HD 308 S2 (core identification) DIN VDE 0293-1 |
| Information: | Please note installation instruction on page 273! Download elevation sheet: www.meinhart.at/service/download |
| Nominal voltage Uo/U | [V] | 600 / 1000 Volt | |
| Test voltage | [V]AC | 4000 | |
| Temperature range | in motion | -20°C till +90°C | |
| Operating temperature | short circuit | °C | 200 |
| Short circuit time | max. | [sec] | 5 |
| Bending radius | min. | x diameter | 8 |
| Oil-resistant | standard | EN 60811-2-1 | |
| Flammability | standard | EN 60332-1-2 |
| Number of cores and nominal cross section mm² | Copper figure kg/km | Cond. construction (appr. value) mm | Overall diameter appr. mm | Weight appr. kg / km | |||||||||||
| 4 x 1,5 | 57,60 | 44 x 0,21 | 11,8 | 222 | |||||||||||
| 5 x 1,5 | 72,00 | 44 x 0,21 | 12,7 | 260 | |||||||||||
| 7 x 1,5 | 100,80 | 44 x 0,21 | 16,0 | 380 | |||||||||||
| 12 x 1,5 | 172,80 | 44 x 0,21 | 22,0 | 720 | |||||||||||
| 18 x 1,5 | 259,20 | 44 x 0,21 | 22,1 | 770 | |||||||||||
| 24 x 1,5 | 345,60 | 44 x 0,21 | 26,1 | 1.000 | |||||||||||
| 30 x 1,5 | 432,00 | 44 x 0,21 | 29,5 | 1.320 | |||||||||||
| 4 x 2,5 | 96,00 | 73 x 0,21 | 14,4 | 335 | |||||||||||
| 5 x 2,5 | 120,00 | 73 x 0,21 | 15,4 | 390 | |||||||||||
| 7 x 2,5 | 168,00 | 73 x 0,21 | 17,9 | 505 | |||||||||||
| Number of cores and nominal cross section mm² | Copper figure kg/km | Cond. construction (appr. value) mm | Overall diameter appr. mm | Weight appr. kg / km | |||||||||||
| 12 x 2,5 | 288,00 | 73 x 0,21 | 25,0 | 970 | |||||||||||
| 18 x 2,5 | 432,00 | 73 x 0,21 | 25,9 | 1.100 | |||||||||||
| 24 x 2,5 | 576,00 | 73 x 0,21 | 30,8 | 1.450 | |||||||||||
| 30 x 2,5 | 720,00 | 73 x 0,21 | 34,9 | 1.950 | |||||||||||
| 4 x 4 | 153,60 | 75 x 0,26 | 16,0 | 435 | |||||||||||
| 4 x 6 | 230,40 | 119 x 0,26 | 17,4 | 530 | |||||||||||
| 4 x 10 | 384,00 | 196 x 0,26 | 21,3 | 830 | |||||||||||
| 4 x 16 | 614,40 | 210 x 0,31 | 24,7 | 1.170 | |||||||||||
| 4 x 25 | 960,00 | 336 x 0,31 | 31,4 | 1.830 | |||||||||||
| 4 x 35 | 1.344,00 | 475 x 0,31 | 33,9 | 2.280 | |||||||||||
| 4 x 50 | 1.920,00 | 684 x 0,31 | 40,2 | 3.220 | |||||||||||
| 4 x 70 | 2.688,00 | 551 x 0,41 | 44,5 | 4.200 | |||||||||||
| 4 x 95 | 3.648,00 | 722 x 0,41 | 51,0 | 5.530 | |||||||||||
| 5 x 4 | 192,00 | 75 x 0,26 | 17,3 | 520 | |||||||||||
| 5 x 6 | 288,00 | 119 x 0,26 | 19,7 | 690 | |||||||||||
| 5 x 10 | 480,00 | 196 x 0,26 | 23,1 | 1.000 | |||||||||||
| 5 x 16 | 768,00 | 210 x 0,31 | 26,8 | 1.400 | |||||||||||
| 5 x 35 | 1.680,00 | 475 x 0,31 | 38,3 | 2.950 | |||||||||||
